BBNovaRacing.com
http://www.bbnovaracing.com/forum/

cage certification
http://www.bbnovaracing.com/forum/viewtopic.php?f=3&t=4797		 Page 1 of 1
Author:  jacobgiles [ Jun Mon 19, 2006 9:51 pm ]
Post subject:  cage certification
how fast can you go with a mild steel cage?? not that im fast, just curious.
Author:  RICK MILLER [ Jun Mon 19, 2006 11:14 pm ]
Post subject: 
7.50 is the limit for mild steel.
Author:  bbnova [ Jun Tue 20, 2006 6:54 am ]
Post subject: 
I think it might be 8.50 Rick... hmmmmmm...
Author:  underdog [ Jun Tue 20, 2006 6:58 am ]
Post subject: 
25.5 certification can be mild steel or moly steel. If your not at that level of certification, then it's 8.50. The basic upgade includes "X" the door bars, funny car cage, larger tube diameter behind the seats, gussets on the intersecting corners and a couple bars under the driver, one under the seat and one under your feet.
Author:  jacobgiles [ Jun Tue 20, 2006 7:50 am ]
Post subject: 
where could i get more information on a 25.5 cage????

could i convert my 10 point cage into that??

thanks
Author:  underdog [ Jun Tue 20, 2006 8:26 am ]
Post subject: 
jacobgiles wrote:
where could i get more information on a 25.5 cage????

could i convert my 10 point cage into that??

thanks


Anything can be updated. I used to have the 25.5 spec, but I gave it away. It costs money to order the spec. You can find info at:
http://www.sfifoundation.com/
Author:  jacobgiles [ Jun Tue 20, 2006 8:28 am ]
Post subject: 
cool, thanks dogg.
Author:  underdog [ Jun Tue 20, 2006 9:15 am ]
Post subject: 
Stock tranny cross member can't be used neither, I just remembered that.
Author:  jacobgiles [ Jun Thu 22, 2006 1:31 pm ]
Post subject: 
25.5 - Full Bodied Car Stock or Modified/OEM Floorpan and Firewall with OEM Frame or Uni-Body Construction – 7.50 to 8.49 Seconds; 3,600 lbs. Maximum

i didnt see anything about going slower than 8.49 though. i just want to make sure i order the right one.
Author:  darlagiles [ Jun Thu 22, 2006 1:49 pm ]
Post subject: 
i have nothing to contribute on the cage certification question.

Just wanted to say hey! Hope you are having a good day! :D
Author:  jacobgiles [ Jun Thu 22, 2006 2:01 pm ]
Post subject: 
:lol:
Author:  jacobgiles [ Jun Fri 23, 2006 10:30 am ]
Post subject: 
what now dogg?
Author:  BT Race Cars [ Jun Tue 27, 2006 10:39 am ]
Post subject: 
jacobgiles wrote:
25.5 - Full Bodied Car Stock or Modified/OEM Floorpan and Firewall with OEM Frame or Uni-Body Construction – 7.50 to 8.49 Seconds; 3,600 lbs. Maximum

i didnt see anything about going slower than 8.49 though. i just want to make sure i order the right one.

Slower than 8.49 you can just use the specs in the NHRA OR IHRA rule book. 8)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/