Jacob???? Are you trying to start a racing related thread here???
| BBNovaRacing.com http://www.bbnovaracing.com/forum/ |
|
| why http://www.bbnovaracing.com/forum/viewtopic.php?f=1&t=16696 |
Page 1 of 1 |
| Author: | jacobgiles [ Feb Sat 07, 2009 11:21 am ] |
| Post subject: | why |
cant i find a off the shelf piston for a 14 degree head? all i see is 18 degree... |
|
| Author: | RICK MILLER [ Feb Sat 07, 2009 12:09 pm ] |
| Post subject: | |
Jacob???? Are you trying to start a racing related thread here???
|
|
| Author: | bbnova [ Feb Sat 07, 2009 12:26 pm ] |
| Post subject: | |
You want me to get ya a price from Diamond??? They are usually 2 weeks... |
|
| Author: | jacobgiles [ Feb Sat 07, 2009 12:38 pm ] |
| Post subject: | |
if you dont mind. 4.500 bore 14 degree big chief (not sure what the chamber is, i will find out) 4.75 crank i havent bought rods yet, whatever length they suggest for the best ring stack for a nitrous application. |
|
| Author: | bbnova [ Feb Sat 07, 2009 2:03 pm ] |
| Post subject: | |
Probably will copy the piston from my 14* stuff. Worked very well... Are you sure the 4.50 bore is big enough for those heads??? Are you sure the chamber isn't bigger than the bore??? Set the head on the block and put a couple fasteners on it and look for the bottom. I doubt those heads will be optimal for that bore?????? Let me know the outcome and then I will get you a price.... |
|
| Author: | jacobgiles [ Feb Sat 07, 2009 4:51 pm ] |
| Post subject: | |
kevin, i knew we kept you around for something.... the block is brand new, i was just thinking i would get more use out of it this way. im sure your right. probably just take it to 4.60 to make it easy. |
|
| Author: | bbnova [ Feb Sat 07, 2009 5:33 pm ] |
| Post subject: | |
A very good choice Jacob... 
One last thing. Is the deck 10.2 dead on??? Sorry, one more. How much spray??? Ok, a couple more... 
Do you want rings? Do you want wrist pins? Do want to use buttons or spiral locks? |
|
| Author: | jacobgiles [ Feb Sat 07, 2009 8:29 pm ] |
| Post subject: | |
ok, talked to todd a little while ago (guy i bought everything from). he confirmed that the heads were for a 4.50 bore and thats why he got the block with the smaller bore. |
|
| Author: | bbnova [ Feb Sat 07, 2009 9:21 pm ] |
| Post subject: | |
You have the heads and block??? Asm them and look thru the bottom just to be sure..... |
|
| Author: | bbnova [ Feb Tue 10, 2009 4:49 pm ] |
| Post subject: | |
Jacob, you didn't answer my question. Do you want a price on just pistons or do you want a price on wrist pins and rings also??? |
|
| Author: | jacobgiles [ Feb Tue 10, 2009 4:57 pm ] |
| Post subject: | |
im gonna need pins and rings also. yes, i have the heads and the block, im not sure what im going to do just yet as far as bore size goes. |
|
| Author: | bbnova [ Feb Tue 10, 2009 5:31 pm ] |
| Post subject: | |
Won't matter for the price.. I will call now... |
|
| Author: | jacobgiles [ Feb Tue 10, 2009 6:45 pm ] |
| Post subject: | |
thanks |
|
| Author: | bbnova [ Feb Wed 11, 2009 6:24 pm ] |
| Post subject: | |
You have a PM... No Dogg, not PMS..... 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|