RICK MILLER wrote:
Scott Williams wrote:
Cubic Inch?
I think he's building a 632 Scott.
Thanks Rick!! Someday when I grow up i will get one of those big engines!!
| BBNovaRacing.com http://www.bbnovaracing.com/forum/ |
|
| kevin http://www.bbnovaracing.com/forum/viewtopic.php?f=1&t=16554 |
Page 1 of 2 |
| Author: | jacobgiles [ Dec Mon 01, 2008 8:26 pm ] |
| Post subject: | kevin |
is a 2 3/8" primary with a 5" outlet collector muffler too big? |
|
| Author: | bbnova [ Dec Mon 01, 2008 9:30 pm ] |
| Post subject: | |
Sounds about right... Is it a step header??? |
|
| Author: | jacobgiles [ Dec Mon 01, 2008 10:23 pm ] |
| Post subject: | |
those are just the mufflers. i was thinkin the headers are gonna be 2 1/4 stepped to 2 3/8 |
|
| Author: | bbnova [ Dec Tue 02, 2008 8:11 am ] |
| Post subject: | |
Better take a look at the exhaust port to make sure that size doesn't shroud the port.... Should be good.... How many RPM???? |
|
| Author: | jacobgiles [ Dec Tue 02, 2008 5:42 pm ] |
| Post subject: | |
i will check the heads and make sure of that. i was gonna ask you about how high to turn it and if you had a cam that would work ok? im still unclear on a few things. |
|
| Author: | bbnova [ Dec Tue 02, 2008 8:35 pm ] |
| Post subject: | |
N/A or spray???? How much should it make on motor???? What size can journal??? |
|
| Author: | Scott Williams [ Dec Tue 02, 2008 10:43 pm ] |
| Post subject: | |
Cubic Inch? |
|
| Author: | jacobgiles [ Dec Tue 02, 2008 10:59 pm ] |
| Post subject: | |
1 stage of nitrous. not sure on the cam journal, its a new dart block. i will have to check that too. |
|
| Author: | RICK MILLER [ Dec Tue 02, 2008 11:09 pm ] |
| Post subject: | |
Scott Williams wrote: Cubic Inch?
I think he's building a 632 Scott. |
|
| Author: | jacobgiles [ Dec Tue 02, 2008 11:46 pm ] |
| Post subject: | |
well for now im going to keep the bore 4.500 so i guess that would be 604? |
|
| Author: | Scott Williams [ Dec Wed 03, 2008 1:36 pm ] |
| Post subject: | |
RICK MILLER wrote: Scott Williams wrote: Cubic Inch? I think he's building a 632 Scott. Thanks Rick!! Someday when I grow up i will get one of those big engines!!
|
|
| Author: | bbnova [ Dec Wed 03, 2008 1:45 pm ] |
| Post subject: | |
Sometimes you don't need that c.i. to go fast...
|
|
| Author: | kireol [ Dec Wed 03, 2008 4:57 pm ] |
| Post subject: | |
quit giving jacob tips. He's building an NPS car! |
|
| Author: | jacobgiles [ Dec Wed 03, 2008 7:29 pm ] |
| Post subject: | |
kireol wrote: quit giving jacob tips. He's building an NPS car!
ok...it might fit the NPS class 
|
|
| Author: | bbnova [ Dec Wed 03, 2008 8:00 pm ] |
| Post subject: | |
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|